Filter Results By:
+
Search Within Filters
Category
Finish
Style
Option
Voltage
Glass Finish or Style
Glass Form
Number of Blades
Location Rating
Mount Type
Wattage
Smart Home
Brand
Specials & Availability
Height
to
Width
to
Length
to
Price
to Powered By
Item Description
Compact, low profile LED exit signs are as brilliant and visible as standard incandescent signs, yet use a fraction of the power. LED light sources require no maintenance for 25 years–saving greatly on maintenance and upkeep costs. LED exits are ideal for commercial and industrial standard non-emergency applications where low maintenance and operating costs are a must. Die-cast exit sign utilizing Light Emitting Diode (LED) modules as the primary light source for economy operation. Exit sign includes a backup NiCad battery for 90 minute operation under emergency applications where primary power source has been interrupted or terminated. LED exit sign with 6" red letters and brushed, die-cast aluminum dual face with black housing.
Input Voltage: 120/277VAC
Wattage: 2W
Finish: Die-cast Aluminum dual face with Black
Face: 6" high red letters with color diffusion. Two front faces sent with dual face unit
Mounting: Wall, side, or ceilling mount. All mounting hardware included
Self Diagnostic: Automatically monitors and tests to ensure proper operation. Self tests one minute each month, thirty minutes every six months and ninety minutes annually.
Listing: cULus Listed for Damp Locations, UL 924, Title 20, NFPA, NFPA 101
Item Description
24V Constant Voltage Class 2 Dimmable LED driver can be used with Nora Lighting’s 24 Volt systems. Compatible with Triac, ELV, MLV, 0-10V, or PWM dimmers and a wide range of applications. NEMA 4X enclosure is rated for wet locations and cULus listed.
Compatibility: 24V Tape Lights, 24V Josh Puck Lights, 24V LED Lightbars
Input Voltage: 110V-277V
Output Voltage: 24VDC
Wattage: 60W
Dimming: Triac, ELV, MLV, 0-10V, or PWM
Knockouts: Five Knockouts
Listings: cULus Listed, NEMX 4X, Wet Location Rated
Optional Accessories:
NALTL-10: 10' Power Line Connector
NALTL-30: 30' Power Line Connector
Item Description
Used to mount NUTP14 tape light to flat surface. Diffused lens, end caps and mounting hardware are included.
Length: 4' (field cuttable)
Finish: Aluminum
Compatible Tape Lights: NUTP14 & NUTP15
Item Description
LED exit sign with 6” green letters / white housing, color diffusion, battery backup & remote capability, self diagnostic testing, and dual fully rotatable lamp heads for maximized adjustability. Exit sign is powered by LED source for maximum life without maintenance; emergency fixtures utilize high performance. In the event of power loss, both sign and heads will operate for a minimum of 90 minutes.
Input Voltage: 120/277V
Wattage: 3.2W
Lumens / Wattage Per Head: (2) 90lm / 0.75WBatteries: (2) 3.6V Replaceable 1000mAh NiCad
Recharge Time: 24 hours
Finish: White
Face: Impact resistant polycarbonate white face plate with flame retardant and internal gasket for wet location rating. Optional second face plate included for exit signs requiring two sides. Fully illuminaited 6" letters with 3/4" stroke and field selectable directional chevrons included.
Mounting: Wall or Side Mount; Listed for installations indoor, outdoor or wet locations.
Remote Capability: 3.6V 1.5W max; Luminaire includes an additional 3.6V battery to operate a remote emergency head up to 1.5W for 90 minutes during power loss. (Damp Location rated when used with remote head)
Emergency: During loss of power, NiCad battery will operate two adjustable LED emergency heads for 90 minutes and additional battery will operature a remote emergency head. Batteries requires 24 hours to recharge when power is restored.
Listing: cULus Listed for Wet Locations, UL 924, NFPA 70, NFPA 101, Title 20
Item Description
2' L-Line series offers a clean and modern appearance with a sleek extruded aluminum housing. Symmetrical light distribution will evenly illuminate surfaces with a diffused lens, making the L-Line ideal for commercial, retail, healthcare and education applications. Available in surface or pendant mounting options. Series can be connected with seamless luminous L, X or T connectors.
Input Voltage: 120-277V
Lumens: Selectable Lumens (1200lm to 2400lm)
Wattage: Selectable Wattage (10W to 21W)
Color Temperature: Selectable CCT (3000K/3500K/4000K)
Color Rendering Index: 80+ CRI
Dimming: 0-10V
Finish: Black
Accessories: Mounting Kit required
Item Description
4" AC Onyx Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4" recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination.
Input Voltage: 120VAC
Lumens / Wattage: 900lm / 11.5W
Color Temperature: Selectable CCT (27K/30K/35K/40K/50K)
Dimming: Triac or ELV
Finish: Black Reflector / Black Flange
Included: Retrofit Adapter
Listing: cETLus classified for wet locations
Item Description
NEXUS simplifies LED array lighting systems by combining an in-wall LED dimmer switch and power supply into a single integrated unit. NEXUS mounts in a standard in-wall switch box, accepts 120VAC and converts to 24V.
FEATURES
• First LED Driver + In-Wall Dimmer Switch in one unit.
• Simplifies LED installation by eliminating compatibility issues between driver and dimmer.
• Fits in a standard recessed electrical box.
• 100% – 5% smooth dimming.
• No minimum load.
• Single Pole preset dimmer with on/off push switch.
• Adjustable voltage output dial to address voltage drop.
• Includes voltage barrier partition to install high and low voltage circuit in same switch box.
• No derating required when ganging units.
• Power failure memory: If power is interrupted, NEXUS® will return to setting prior to interruption.
• cULus Listed (US & Canada) Low Voltage Lighting System #E472619.
Face Plate: White face included.
Note: Decora switch plate not included
Item Description
Used to mount NUTP14 tape light to flat surface. Diffused lens, end caps and mounting hardware are included.
Length: 4' (field cuttable)
Finish: Aluminum
Compatible Tape Lights: NUTP14 & NUTP15
Item Description
4" AC Onyx Retrofit Series requires no driver and allow for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4" recessed housings. Deep regressed optics and round aperture deliver even and glare-free illumination.
Input Voltage: 120VAC
Lumens / Wattage: 900lm / 11.5W
Color Temperature: Selectable CCT (27K/30K/35K/40K/50K)
Dimming: Triac or ELV
Finish: White Baffle / White Flange
Included: Retrofit Adapter
Listing: cETLus classified for wet locations
Item Description
4” AC Onyx Retrofit Series requires no driver and allows for a sleek design. Baffle trim minimizes glare by absorbing and diffussing excess light, suitable for use with most 4” recessed housings.
Input Voltage: 120VAC
Lumens / Wattage: 1000lm / 15W
Color Temperature: 3000K
Dimming: Triac or ELV
Finish: White Baffle / White Flange
Included: Retrofit Adapter
Listing: cETLus classified for wet locations
Accessories:
NOX-4EYELID: Round Eyelid for 4" Onyx
NOX-4OR-W: Oversize Ring for 4" Onyx
Item Description
4” AC Onyx Retrofit Series requires no driver and allows for a sleek design. Spun aluminum construction provides clean sharp edges and is suitable for use with most 4” recessed housings. Deep-regressed optics and round aperture deliver even and glare-free illumination.
Input Voltage: 120VAC
Lumens / Wattage: 1000lm / 15W
Color Temperature: 2700K
Dimming: Triac or ELV
Finish: White Reflector / White Flange
Included: Retrofit Adapter
Listing: cETLus classified for wet locations
Accessories:
NOX-4EYELID: Round Eyelid for 4" Onyx
NOX-4OR-W: Oversize Ring for 4" Onyx
NOX-4REFL: Reflector Insert for 4" Onyx
NOX-4BAF: Baffle Insert for 4" Onyx
Item Description
4" AC Opal LED surface mount fixtures are designed to install over a standard junction box or retrofit over 4" recessed housings. The low profile dimmable luminaire produces even illumination in selectable CCT options.
Input Voltage: 120VAC
Lumens / Wattage: 700lm / 10W
Color Temperature: Selectable CCT (27K/30K/35K/40K/50K)
Color Rendering Index: 90+ CRI
Dimming: Triac or ELV
Finish: White
Listing: cETLus Listed for Wet Locations
Item Description
LED exit sign with 8" red letters with 1" stroke and white housing. NYC Approved Steel LED Exit with three 1W / 100lm per head adjustable head LED emergency lights & battery backup. Rugged 20 gauge steel luminaires comply with the latest New York City codes and performance standards. Available in exit or exit/ emergency combination units.
Input Voltage: 120/277VAC
Wattage: 4.1W
Lumens / Wattage Per Head: (3) 100lm / 1W
Battery: Ni-Cad 3.6V 600mAH per head battery offers 90 minute emergency operation on fully charged battery.
Testing: High-charge / ready operation indicator light and test button.
Finish: White
Face: Both double and a blank face are included with 8" red letters and 1" stroke. Knockout directional chevrons
Mounting: Wall or side mount. All mounting hardware included.
Listing: cULus Listed for Damp Locations, UL 924, NFPA 101, NYC Approved
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site