Filter Results By:
+
Search Within Filters
Category
Finish
Style
Option
Voltage
Glass Finish or Style
Glass Form
Number of Blades
Location Rating
Mount Type
Wattage
Smart Home
Brand
Height
to
Width
to
Length
to
Price
to Powered By
Item Description
Hand held remote is used to program RGBW or CCT tape light to certain color configurations. The remote can be used up to 90? from controller, must be in direct view. It can be used to control four controllers simultaneously
Compatible Controller: NATL-875
Key Selections: Brightness, colors, color changing – flash, strobe, fade and smooth fade, on/off
Batteries: 2 x AAA
Item Description
The 9" power cord allows for easy connection to any plug-in driver. NATL-509 is included and connected to each Tape Light roll. Power cords are used for separated tape light rolls to be installed in different locations. Use linking cables to extend length.
Compatible: Side-Lit Tape Light
Item Description
CCT Touch pad wall controller for 24V CCT color tuning tape light
Includes: Mounting back box.
Requires: 24V LED driver
Functions: Local control of CCT, on/off with memory and dimming.
Item Description
The 18" linking cable allows for the linking of two Tape Light runs in any direction.
Linking cables can be joined together for various lengths.
Linking cables can also be used to extend Power Cords.
Compatible: Side-Lit Tape Light
Item Description
The 12" power line interconnector cable allows for easy connection to any driver. NAHO-609 is included and connected to each High Output & Hy-Brite Tape Light roll. Power Line interconnector cables are used for separated tape light rolls or sections to be installed in different locations. Use interconnection cables to extend length.
Compatible: High Output Tape Light & Hy-Brite Tape Light
Finish: White
Item Description
3" Power cord with DC connector for Continuous Hy-Brite tape (NUTP51) or High Output tape (NUTP81). Connects LED tape light to LED driver.
Item Description
12" Power cord with DC connector for Continuous Hy-Brite tape (NUTP51) or High Output tape (NUTP81). Connects LED tape light to LED driver.
Item Description
48" Hardwire power cord for supplying power to tape (NUTP71) or joining several runs of tape to a single power source. Can be used to create a “Y” or “X”.
Item Description
The 24" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Standard Continuous Tape Light (NUTP71)
Item Description
Used to mount Tape Light. Includes screws. Sold in pack of 15.
Note: 15 Clear Acrylic Mounting Clips are included with every Tape Light roll and kit.
Item Description
Used to mount Tape Light. Includes screws. Sold in pack of 15.
Note: 15 Clear Acrylic Mounting Clips are included with every Tape Light roll and kit.
Item Description
The 24" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Continuous Hy-Brite (NUTP51) or Continuous High Output (NUTP81) Tape Light
Item Description
The 18" linking cable allows for the linking of any two CCT Tape Light runs in any direction.
Linking cables can be joined together for various lengths.
Linking cables can also be used to extend Power Cords.
Compatible: 24V CCT Color Tuning Tape Light
Item Description
The 12" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Continuous Hy-Brite (NUTP51) or Continuous High Output (NUTP81) Tape Light
Item Description
The 6" linking cable allows for the linking of two Tape Light runs in any direction.
Compatible Tape Light: Continuous Hy-Brite (NUTP51) or Continuous High Output (NUTP81) Tape Light
Item Description
The 6" linking cable allows for the linking of two Tape Light runs in any direction.
Linking cables can be joined together for various lengths.
Linking cables can also be used to extend Power Cords.
Compatible: Side-Lit Tape Light
Item Description
3" Hardwire power cord for supplying power to tape (NUTP71) or joining several runs of tape to a single power source. Can be used to create a “Y” or “X”.
Item Description
The 12" power line interconnector cable allows for easy connection to any CCT controller. NARGB-710 is included and connected with each CCT Tape Light roll. Power Line interconnector cables are used for separated tape light rolls or sections to be installed in different locations. Use linking cables to extend length.
Compatible: 24V CCT Color Tuning Tape Light
Home
About Us
Find Us
Set Appointment
Call Us
Email Us
Online Catalog
Wishlist
Login
Full Site
Mobile Site